If you like your water chilled and want instant access then an under sink water chiller can be an ideal solution. This particular water chiller unit will produce 11.5 litres of cold water per hour* which is sufficient for domestic use or small to middle sized offices. Complete with a full installation kit and basic swan neck tap this water chiller unit can be connected by a competent DIY person or a suitable tradesman. You will need to make sure you have sufficient space for both the water chiller unit 30cm Deep x 41cm wide x 30cm high and remember to allow extra space for ventilation.
SHIPMENT TO UK MAINLAND INCLUDED IN PRICE
Performance: Cold water outlet temperature 7oC. Cooling capacity 11.5ltr/hr (performance will vary according to feed water and ambient temperature).
Power: 75 watts (maximum)
Cooler Casing: Stainless steel 304
Tank Material: Powder coated painted 18 SWG cold rolled steel
Thermostat : Factory set (adjustable)
Refrigerant: R134a (ozone friendly)
Characteristics: Capacity – 200 BTU/hr (55w) 220V / 50Hz 1Ph.
Locked Rotor: 5.1A
Dimensions 300mm deep x 410mm wide x 300mm high
Weight : 13.3kg
Water Pressure : 0.5 to 5.8 bar (7.5 to 85psi)
Feed Type: Municipally treated mains cold water only
Ventilation: Installation site must allow for adequate air flow around the water chiller unit
Certification CE, UL, CSA
The above information regarding water chillers is given in good faith and should be used as a guide only. In line with our policy of continual product development, we reserve the right to alter the specification of systems without prior notice. Actual performance water chillers will depend upon site conditions and usage.