Broken Water Cooler
Occasionally a water cooler may stop working. There are a number of reasons why this may occur but often the solution is very simple and can be carried out quickly and easily.
The most common fault with plumbed in water coolers is that they stop dispensing water! This can be caused by either a fault with the supply of water to the machine or a reset switch within the water cooler.
Assuming that the supply to the water coolers is working, namely there is flow from nearby taps from the same source then it the following reset switch procedures can be undertaken.
PLEASE NOTE! these instructions are suitable for tank fed Plumbed in water coolers. If you have a bottled water cooler,Direct chill or ice bank chilled water cooler then these instructions are not suitable.
We provide no Guarantee that these instructions will solve your issue. We also advise that if you are in doubt to call your service provider for further guidelines.
UK Aqua accept no responsobility for damage or injury done to the water cooler whilst undertaking this procedure.